Reversible Buckle - NP, 40 mm
Reversible Buckle Nickel Plated, 40 mm. 3 3/8"long, 2 1/8" outside width, 1 1/2" inside width. Attach with 2 Set Screws, included.
Make your own 2-in-1 belt with our ultra-high-end, highly polished, reversible buckles! Finish one side of your belt blank in black, and the other in brown, or leave one side natural to let it burnish and patina with wear, or even laminate 2 different leathers together for an interesting switch. Then with a simple pull and twist action, you can easily flip your belt from one side to the other! You’ll always have two belts at the ready! Available in two sizes and two finishes.
To attach buckle: insert the end of your leather strip into the slot. While your leather strip is still in the slot, mark and punch your holes for the set screws using an awl. Then set your screws, but make sure they're threaded about halfway into the tap (at the most). If you screw them in too far, your strip is likely to pull out.
35mm NP Item # 115-1001
35mm BP Item #115-1002
40mm BP Item #115-1004